American Standard
| Metric
| High Torque
Open-End/Spliced
Click here for Timing Belt Specifications
American StandardVaughn Belting Company, Inc. offers slit to order from sleeves - no extra charge for special widths. Made of black neoprene with fiberglass reinforcement construction. Available in XL -L -H -XH -DXL -DL -DH. We also have available American Standard Polyurethane timing belts in XL -L -H with steel reinforcement construction. These belts are non-dusting/non-marking with a high resistance to oil and grease. MetricVaughn Belting Company, Inc. offers slit to order from sleeves. These polyurethane metric timing belts have good abrasion resistance and are steel reinforced. They are non-dusting/non-marking with a high resistance to oil and grease. Available in the following pitches: T2.5 -T5 -T10 -DT5 -DT10. We also have available: AT5 -AT10 pitches which feature a new design for higher horsepower rating. These belts have a wider tooth profile which increases tooth shear strength. High TorqueAvailable sleeves of 3M -5M -8M -14M -20M so we can slit to order with no extra charge for special widths. We also have available over 100 non-standard lengths. Contact Vaughn Belting Company, Inc. for dual sided D5M -D8M -D14M availability. Supertorque timing belts are made of black neoprene with fiberglass reinforcement construction. They are available in the following sizes: S3M -S4.5M -S5M -S8M -S14M. Open-End/SplicedWe offer these belts in steel or Kevlar reinforced construction for excellent dimensional stability. These belts are non-dusting/non-marking and are highly resistant to oil and grease. They can be made with nylon fabric on the tooth or back side. Spliced belts can be bought any length starting at 900MM and there is no minimum quantity on cut lengths for open ended belts. Open end and spliced urethane belts are available in XL -L -H -XH -T5 -T10 -T20 -AT5 -AT10 -AT20 -5M -8M -14M. Made in the USA. |